Connect with us

Hi, what are you looking for?

World of WunderWorld of Wunder

Equipment

Genesis Invitational at Riviera: Monday Photo Gallery

I lived in this town for 15 years, and I must say it is good to be back at Riv. The place is dripping with history, and from a visual standpoint, it might be as stunning as any inland course in the country; it’s simply incredible.

Monday was a nice cool off after the WMPO/Super Bowl insanity of the weekend, but it was busy nonetheless. We also had Roger back on the truck, which always makes things 100 times better.

Enjoy the Gallery

My favorite moments to capture are when Odysseys Joe Toulon critiques Eric Stubben on just about anything. In this case it’s Erics ability to peel off tape.
Roger and Min Woo Lee discussing some options for a new set of wedges.
Roger put a “Sunshine” grind on a new 60 for Min Woo, this grind takes a little bounce off the back and adds a little to the leading edge.
This Toulon Daytona Proto will get tested this week by none other than the X-Man
Xander will also be testing this Apex UW (21)
Like his 7-wood, Xander will test the MCA Kai’li White 90TX in the UW
Here is the build sheet
Matt Wallace added X-Forged CB 6 and 7 irons to his set this week, his set make-up is now 4-7 XFCB and 8-P Apex MB ’18
Alex Noren added a new whip to his Rogue ST Max LS T….
…the Fujikura Ventus Blue TR 6X, Alex liked that this gave him the same spin window as the black but with a bit softer feel and higher launch.
This place is Magic

Kevin Na added some new shafts to his 3 and 5-wood over the past few weeks, going into the MCA Kai’li Blue 60TX in the 3-wood and 70TX in the 5-wood.

23
5 Comments

5 Comments

  1. Ed Settle

    February 15, 2022 at 6:32 am

    That Daytona Proto is stunning. Should be a perfect fit for Xander

  2. Jerry Taylor

    February 15, 2022 at 1:09 pm

    Any chance you guys will release the raw forged wedges with the “T” grind this year?
    Thanks

  3. Gino

    February 15, 2022 at 4:26 pm

    Ooooh weeeee! That Kai’li blue! When does that come out?

  4. Michael Wong

    February 15, 2022 at 10:26 pm

    What club head weight in Xander’s UW to get to D3 swingweight? 7g?

    • Michael Wong

      February 15, 2022 at 10:27 pm

      Also, based on build sheet, was club head bent open to achieve the 18.9* loft with 21* head?

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like

Sticky Post

Stats Fairways Hit 48/56 86%Driving Distance 296 yds GIR 52/72 72%Sand Saves 3/5 60%Putting 1.61 Per GIRBirdies 19Eagles 1 Hole by Hole club log...

Equipment

View this post on Instagram A post shared by Callaway Golf (@callawaygolf) Putter Specs:  MODEL: White Hot OG Rossie SINSERT: Micro Hinge StarSHAFT: Steel SteppedLENGTH: 37 Inches EOGGRIP: Odyssey...

Sticky Post

#2 Jon Rahm Putter Specs:  MODEL: White Hot OG Rossie SINSERT: Micro Hinge StarSHAFT: Steel SteppedLENGTH: 37 Inches EOGGRIP: Odyssey 56 (4 Wraps) LOFT/LIE: 2.5/68TOTAL WEIGHT: 544 Grams  #7 Xander Schauffele Ball:...

Sticky Post

Putter Specs:  MODEL: White Hot OG Rossie SINSERT: Micro Hinge StarSHAFT: Steel SteppedLENGTH: 37 Inches EOGGRIP: Odyssey 56 (4 Wraps) LOFT/LIE: 2.5/68TOTAL WEIGHT: 544 Grams  #rahmbo WITB Posts from 2021: 26